Anri-chan 3.3 (June 5, 2011)

ballofsnow

Edit history:

ballofsnow: 2013-08-21 05:22:26 pm

ballofsnow: 2013-03-18 09:47:40 pm

ballofsnow: 2013-03-17 09:49:54 am

ballofsnow: 2013-02-10 10:29:20 am

ballofsnow: 2013-01-12 08:48:42 am

ballofsnow: 2012-04-24 10:24:54 am

ballofsnow: 2012-04-24 10:24:32 am

ballofsnow: 2011-11-26 08:08:56 am

ballofsnow: 2011-10-26 07:52:41 pm

ballofsnow: 2011-10-10 09:17:55 am

ballofsnow: 2011-10-02 06:19:53 pm

ballofsnow: 2011-10-02 06:19:37 pm

ballofsnow: 2011-10-02 06:17:00 pm

ballofsnow: 2011-09-15 06:38:13 pm

ballofsnow: 2011-09-10 11:24:34 am

ballofsnow: 2011-09-10 11:24:02 am

ballofsnow: 2011-07-08 04:03:23 pm

ballofsnow: 2011-06-05 10:01:28 pm

ballofsnow: 2011-06-05 09:59:37 pm

ballofsnow: 2011-06-05 09:59:23 pm

ballofsnow: 2011-06-05 09:57:53 pm

ballofsnow: 2011-06-05 09:40:53 pm

ballofsnow: 2011-06-05 03:20:37 pm

ballofsnow: 2011-06-04 09:56:09 pm

ballofsnow: 2011-06-04 12:45:20 pm

ballofsnow: 2011-06-04 12:44:10 pm

ballofsnow: 2011-05-29 09:09:32 am

ballofsnow: 2011-05-22 07:40:29 pm

ballofsnow: 2011-05-22 07:40:14 pm

ballofsnow: 2011-05-22 07:19:17 pm

ballofsnow: 2011-05-21 02:54:27 pm

ballofsnow: 2011-05-21 02:37:44 pm

ballofsnow: 2011-05-21 01:40:44 pm

ballofsnow: 2011-05-21 01:38:25 pm

ballofsnow: 2011-05-21 01:37:23 pm

ballofsnow: 2011-05-21 01:31:28 pm

ballofsnow: 2011-05-21 01:29:53 pm

ballofsnow: 2011-05-21 01:29:38 pm

ballofsnow: 2011-05-21 01:29:14 pm

ballofsnow: 2011-05-21 01:28:30 pm

ballofsnow: 2011-05-21 01:28:13 pm

ballofsnow: 2011-05-08 02:22:20 pm

ballofsnow: 2011-05-06 10:31:31 am

ballofsnow: 2011-05-01 05:41:19 pm

ballofsnow: 2011-04-30 08:31:47 pm

ballofsnow: 2011-04-30 07:45:36 pm

ballofsnow: 2011-04-30 02:44:19 pm

ballofsnow: 2011-04-30 12:54:24 pm

ballofsnow: 2011-04-30 11:35:42 am

ballofsnow: 2011-04-30 11:22:34 am

ballofsnow: 2011-04-29 10:27:03 am

ballofsnow: 2011-04-23 03:43:40 pm

ballofsnow: 2011-04-23 12:03:10 pm

ballofsnow: 2011-04-23 12:00:37 pm

ballofsnow: 2011-04-23 12:00:00 pm

ballofsnow: 2011-04-23 11:59:17 am

ballofsnow: 2011-04-23 11:58:49 am

ballofsnow: 2011-04-23 11:58:28 am

ballofsnow: 2011-04-23 11:58:10 am

ballofsnow: 2011-04-23 11:57:41 am

ballofsnow: 2011-04-23 11:57:07 am

ballofsnow: 2011-04-22 04:58:16 pm

ballofsnow: 2011-04-22 04:57:02 pm

ballofsnow: 2011-04-22 04:54:45 pm

ballofsnow: 2011-04-22 12:03:02 pm

ballofsnow: 2011-04-22 11:57:32 am

ballofsnow: 2011-04-22 11:39:12 am

ballofsnow: 2011-04-22 11:38:16 am

ballofsnow: 2011-04-22 11:35:42 am

ballofsnow: 2011-04-17 12:36:00 pm

ballofsnow: 2011-04-09 06:15:02 pm

ballofsnow: 2011-04-09 06:14:40 pm

ballofsnow: 2011-04-03 10:53:28 am

ballofsnow: 2011-03-20 10:35:23 am

ballofsnow: 2010-12-25 10:30:12 am

ballofsnow: 2010-11-13 05:00:49 pm

ballofsnow: 2010-10-23 11:56:21 am

ballofsnow: 2010-08-31 06:18:25 pm

ballofsnow: 2010-08-28 07:50:37 pm

ballofsnow: 2010-08-28 03:05:47 pm

ballofsnow: 2010-08-28 11:20:45 am

ballofsnow: 2010-08-20 07:36:58 pm

ballofsnow: 2010-07-01 11:25:39 am

2008-03-31 01:11:09 am

Anri-chan not working for you? Try the more modern Yua instead!

Anri-chan download page.

Anri-chan development thread.

To-do list

Use 4:2:2 on sample creation
Check for abnormally high audio sample rate
Verify trim ranges are valid.
minor: anri says sample can be found on desktop, but parent folder can be changed. info
crop automation. info
explore possibility of ffmpegsource.. again. info
Stopping Anri mid-render and continuing. info
possible nmf method for mpeg using tssplitter. info
better color conversion method. info
QTGMC deinterlacing as replacement to mvbob
Auto shutdown after encoding is complete. *Would be better in a GUI in case user needs to cancel*
Reduce amount of x264 passes for different qualities that have identical video/audio.
Auto-update feature
Variable frame rate..?
Auto decimate. info
META tags in mp4 files
Chapter information in mp4

Changes in 3.4 (not yet released)

WAV 32-bit 4 GB limitation causes audio to suddenly go silent after 4-6 hours. Use WAV64 (64-bit) instead. info & mod
Source input option for AviSynth .avs files using import(). info & mod
AAC support in M2TS stream. info & mod

Changes in 3.3 (June 5, 2011)

Re-use nmf source videos between encoding sessions.
Cropping.
Set PAR at video stream level (more compatible) instead of container level. Can be changed without re-encoding using tool found here.
Change aspect ratio on existing mp4 video.
Settings menu. Change where projects are saved, specify top or bottom field by default. Other stuff.
Audio piping through wavi instead of vdub/bepipe
Add multiple audio commentary tracks
Support for m2ts AVC stream
Encoding method changed to single crf pass + second pass if bitrate cap exceeded.
Fixed: mvbob width and height requirements
Fixed: double-prompt when using dfnd database. info
Fixed: decimate logic. info
Use yuy2 colourspace for NMF.

Changes in 3.2 (June 13, 2010)

NMF to work around Anri/AviSynth's inability to append a large amount of files
Combined avi individual and automatic input. One less question, and ability to mix folder or file input.
Vdub window for pixel shift. Added deflicker alt and one pixel alt.
Change name of finished folder to projectname_finished. (for nate)
fixed: bepipe audio encoding as backup to vdub+nero when encoding long runs
fixed: incorrect resize on low resolution input for D4 progressive.

Changes in 3.1 (May 2, 2010)

Option to add audio commentary
Specify if there is audio commentary on statID
Option for blank statID or regular statID
Accept individual avs input
Support for HD console footage. (avi)
Set IQ to 1366x768 instead of 1280x720. The former is more common in TVs than the latter.
Some questions have default answers enclosed in parentheses, just hit enter if you want to use the default answer.
fixed - mono input causes problems when joining the statID
fixed - decomb.dll missing from plugins
fixed - NMF should set Lagarith to Yv12 only temporarily.

Changes in 3.0 (December 6, 2009)

F3 decimation changed to F2+decimate(cycle=3). Less bobbing.
Option to apply 16x9 widescreen display aspect ratio (4:3 PAR)
Update x264 and arguments.
IQ is 1280x720. (720p)
Xvid qualities indicated as non-submittable to SDA.
Use Lagarith 1.3.20, from 1.3.17
Enable Lagarith multithreading.
nmf task list check every 20 seconds, from 10.
fixed - If HQ has a lower-than-target bitrate, IQ will be skipped even if it has a higher resolution
fixed - Failed attempt to write lagarith.ini to non-existing windows folder.
fixed - Parentheses not accepted in statid
fixed - Sample extractor. Check for non mod 2 resolution.

Changes in 3 beta 4 (August 9, 2008)

Rework handling of resolutions per qualities. Especially widescreen. Check for non mod 2 resolution.
fixed - Statid gets stretched on widescreen video.
fixed - XP home doesn't come with tasklist.exe
fixed - Use avisource mainly, and directshowsource when needed.
fixed - DF list is not updating
fixed - Going back to edit settings after review causes problems.
fixed - DF GB not cropping.
fixed - Using a capture card with DVD settings.
fixed - Desktop path for non-english systems.
Change message in sample extractor so people don't freak out as much.
fixed - Include msvcr71.dll dependency for mvbob on some systems.
Use Lagarith version 1.3.17. Previous was 1.3.14.

Changes in 3 beta 3 (July 10, 2008)

Added a main menu, and removed desktop shortcuts to sample and statid.
Ipod / Xbox 360 / PS3 compatibility
Separate the DVD rip procedure: avoid repeat rips, user can have more than one "dvd" on hard drive to encode at same time, join DVDs into one project.
Change destination of DVD rips via ini.bat (open in text editor)
Allow NMF for D1/F*
Use DGMPGDec 1.50
Use a more up to date version of x264

Changes in 3 beta 2 (May 11, 2008)

Anri-chan has colour! (Psonar)
Hide output pane in Vdub
Move videos to finished folder
Support high resolution for PC games
Correct avi resizing in case of non 4:3 videos.
X-TREME Quality (10 mbps) for high-def
Rip specific DVD titles. (advanced mode, enable in ini.bat)
Skip DFnD questions when Fraps video is detected.
Shortcuts added to start menu.

Changes in 3 beta 1 (March 30, 2008)

Sumi-Chan batch port for New Master File. Saves time encoding HQ/IQ by encoding an NMF with lagarith lossless codec and encoding based off that. Only to be used if you have a LOT of empty hard drive space.
Determine field order by using splitscreen and asking the user.
Trim array for multiple frame ranges.
Multiple avi load.
Ability to tweak AviSynth scripts manually without being overwritten by job.bat. (Don't modify job.bat though!)
AVI sample extractor.
Change directory where projects are saved via ini.bat.
Determine if HQ pass failed to converge, skip IQ if true.

Thread title:

[color="green"][size="20"]Anri-chan not working for you? Try the more modern [url=https://forum.speeddemosarchive.com/post/yua.html][u]Yua[/u][/url] instead![/size][/color]

[size="15"][u][url=http://kb.speeddemosarchive.com/Anri-chan]Anri-chan download page.[/url][/u][/size]

[url=http://forum.speeddemosarchive.com/post/anrichan.html]Anri-chan development thread.[/url]

[u]To-do list[/u]
[ul]
[li]Use 4:2:2 on sample creation[/li]
[li]Check for abnormally high audio sample rate[/li]
[li]Verify trim ranges are valid.[/li]
[li]minor: anri says sample can be found on desktop, but parent folder can be changed. [url=http://forum.speeddemosarchive.com/post/anrichan_3.3__june_5_2011_373.html]info[/url][/li]
[li]crop automation. [url=http://forum.speeddemosarchive.com/post/anrichan_3.2__june_13_2010_357.html]info[/url][/li]
[li]explore possibility of ffmpegsource.. again. [url=http://forum.speeddemosarchive.com/post/anrichan_3.2__june_13_2010_352.html]info[/url][/li]
[li]Stopping Anri mid-render and continuing. [url=http://forum.speeddemosarchive.com/post/stopping_anri_midrender_and_continuing__solved.html#stopping_anri_midrender_and_continuing__solved_8-]info[/url][/li]
[li]possible nmf method for mpeg using tssplitter. [url=http://forum.speeddemosarchive.com/post/virtualdubavisynth_file_limit_16.html]info[/url][/li]
[li]better color conversion method. [url=http://forum.speeddemosarchive.com/post/anrichan513.html]info[/url][/li]
[li][url=http://forum.speeddemosarchive.com/post/deinterlacing_1080i59.94_to_1080p29.94__best_way_sample_inside.html]QTGMC[/url] deinterlacing as replacement to mvbob[/li]
[li]Auto shutdown after encoding is complete. *Would be better in a GUI in case user needs to cancel*[/li]
[li]Reduce amount of x264 passes for different qualities that have identical video/audio.[/li]
[li]Auto-update feature[/li]
[li]Variable frame rate[url=http://forum.speeddemosarchive.com/post/oot_quality_test__9.html#oot_quality_test__9]..?[/url][/li]
[li]Auto decimate. [url=http://forum.speeddemosarchive.com/post/auto_decimate_no_more_f_database.html]info[/url][/li]
[li]META tags in mp4 files[/li]
[li][url=http://speeddemosarchive.com/forum/index.php/topic,8598.msg239269.html#msg239269]Chapter information in mp4[/url][/li]
[/ul]
[u]Changes in 3.4[/u] (not yet released)
[ul]
[li]WAV 32-bit 4 GB limitation causes audio to suddenly go silent after 4-6 hours. Use WAV64 (64-bit) instead. [url=http://forum.speeddemosarchive.com/post/is_there_a_limit_to_.wav_lengthsize_50.html]info[/url] & [url=http://speeddemosarchive.com/anrichan/anri3.3_wav64_20111026.zip]mod[/url][/li]
[li]Source input option for AviSynth .avs files using import(). [url=http://forum.speeddemosarchive.com/post/saving_videos_and_reencoding_at_a_later_date_28.html]info[/url] & [url=http://speeddemosarchive.com/anrichan/anri3.3_avsimport_20130120.zip]mod[/url][/li]
[li]AAC support in M2TS stream. [url=https://forum.speeddemosarchive.com/post/problem_when_using_anrichan_25.html]info[/url] & [url=https://forum.speeddemosarchive.com/attachment/5305JLFhjQc3epCyyNA0aobUkYs]mod[/url][/li]
[/ul]
[color=limegreen][u]Changes in 3.3[/u][/color] (June 5, 2011)
[ul]
[li]Re-use nmf source videos between encoding sessions.[/li]
[li]Cropping.[/li]
[li]Set PAR at video stream level (more compatible) instead of container level. Can be changed without re-encoding using tool found [url=http://forum.doom9.org/showthread.php?t=152419]here[/url].[/li]
[li]Change aspect ratio on existing mp4 video.[/li]
[li]Settings menu. Change where projects are saved, specify top or bottom field by default. Other stuff.[/li]
[li]Audio piping through wavi instead of vdub/bepipe[/li]
[li]Add multiple audio commentary tracks[/li]
[li]Support for m2ts AVC stream[/li]
[li]Encoding method changed to single crf pass + second pass if bitrate cap exceeded.[/li]
[li]Fixed: mvbob width and height requirements[/li]
[li]Fixed: double-prompt when using dfnd database. [url=http://forum.speeddemosarchive.com/post/anrichan_3.2__june_13_2010_334.html]info[/url][/li]
[li]Fixed: decimate logic. [url=http://forum.speeddemosarchive.com/post/problem_with_easycap_dc60_capture_software_and_anrichan_5.html#problem_with_easycap_dc60_capture_software_and_anrichan_5]info[/url][/li]
[li]Use yuy2 colourspace for NMF.[/li]
[/ul]
[u]Changes in 3.2[/u] (June 13, 2010)
[ul]
[li]NMF to work around Anri/AviSynth's inability to append a large amount of files[/li]
[li]Combined avi individual and automatic input. One less question, and ability to mix folder or file input.[/li]
[li]Vdub window for pixel shift. Added deflicker alt and one pixel alt.[/li]
[li]Change name of finished folder to projectname_finished. (for nate)[/li]
[li]fixed: bepipe audio encoding as backup to vdub+nero when encoding long runs[/li]
[li]fixed: incorrect resize on low resolution input for D4 progressive.[/li]
[/ul]
[u]Changes in 3.1[/u] (May 2, 2010)
[ul]
[li]Option to add audio commentary[/li]
[li]Specify if there is audio commentary on statID[/li]
[li]Option for blank statID or regular statID[/li]
[li]Accept individual avs input[/li]
[li]Support for HD console footage. (avi)[/li]
[li]Set IQ to 1366x768 instead of 1280x720. The former is more common in TVs than the latter.[/li]
[li]Some questions have default answers enclosed in parentheses, just hit enter if you want to use the default answer.[/li]
[li]fixed - mono input causes problems when joining the statID[/li]
[li]fixed - decomb.dll missing from plugins[/li]
[li]fixed - NMF should set Lagarith to Yv12 only temporarily.[/li]
[/ul]
[u]Changes in 3.0[/u] (December 6, 2009)
[ul]
[li]F3 decimation changed to F2+decimate(cycle=3). Less bobbing.[/li]
[li]Option to apply 16x9 widescreen display aspect ratio (4:3 PAR)[/li]
[li]Update x264 and arguments. [/li]
[li]IQ is 1280x720. (720p)[/li]
[li]Xvid qualities indicated as non-submittable to SDA.[/li]
[li]Use Lagarith 1.3.20, from 1.3.17[/li]
[li]Enable Lagarith multithreading.[/li]
[li]nmf task list check every 20 seconds, from 10.[/li]
[li]fixed - If HQ has a lower-than-target bitrate, IQ will be skipped even if it has a higher resolution[/li]
[li]fixed - Failed attempt to write lagarith.ini to non-existing windows folder.[/li]
[li]fixed - Parentheses not accepted in statid[/li]
[li]fixed - Sample extractor. Check for non mod 2 resolution.[/li]
[/ul]
[u]Changes in 3 beta 4[/u] (August 9, 2008)
[ul]
[li]Rework handling of resolutions per qualities. Especially widescreen. Check for non mod 2 resolution.[/li]
[li]fixed - Statid gets stretched on widescreen video.[/li]
[li]fixed - XP home doesn't come with tasklist.exe[/li]
[li]fixed - Use avisource mainly, and directshowsource when needed.[/li]
[li]fixed - DF list is not updating [/li]
[li]fixed - Going back to edit settings after review causes problems.[/li]
[li]fixed - DF GB not cropping.[/li]
[li]fixed - Using a capture card with DVD settings.[/li]
[li]fixed - Desktop path for non-english systems.[/li]
[li]Change message in sample extractor so people don't freak out as much.[/li]
[li]fixed - Include msvcr71.dll dependency for mvbob on some systems.[/li]
[li]Use Lagarith version 1.3.17. Previous was 1.3.14.[/li]
[/ul]
[u]Changes in 3 beta 3[/u] (July 10, 2008)
[ul]
[li]Added a main menu, and removed desktop shortcuts to sample and statid.[/li]
[li]Ipod / Xbox 360 / PS3 compatibility[/li]
[li]Separate the DVD rip procedure: avoid repeat rips, user can have more than one "dvd" on hard drive to encode at same time, join DVDs into one project.[/li]
[li]Change destination of DVD rips via ini.bat (open in text editor)[/li]
[li]Allow NMF for D1/F*[/li]
[li]Use DGMPGDec 1.50[/li]
[li]Use a more up to date version of x264[/li]
[/ul]
[u]Changes in 3 beta 2[/u] (May 11, 2008)
[ul]
[li]Anri-chan has colour! (Psonar)[/li]
[li]Hide output pane in Vdub[/li]
[li]Move videos to finished folder[/li]
[li]Support high resolution for PC games[/li]
[li]Correct avi resizing in case of non 4:3 videos.[/li]
[li]X-TREME Quality (10 mbps) for high-def[/li]
[li]Rip specific DVD titles. (advanced mode, enable in ini.bat)[/li]
[li]Skip DFnD questions when Fraps video is detected.[/li]
[li]Shortcuts added to start menu.[/li]
[/ul]
[u]Changes in 3 beta 1[/u] (March 30, 2008)
[ul]
[li]Sumi-Chan batch port for New Master File. Saves time encoding HQ/IQ by encoding an NMF with lagarith lossless codec and encoding based off that. Only to be used if you have a LOT of empty hard drive space.[/li]
[li]Determine field order by using splitscreen and asking the user. [/li]
[li]Trim array for multiple frame ranges.[/li]
[li]Multiple avi load.[/li]
[li]Ability to tweak AviSynth scripts manually without being overwritten by job.bat. (Don't modify job.bat though!)[/li]
[li]AVI sample extractor.[/li]
[li]Change directory where projects are saved via ini.bat.[/li]
[li]Determine if HQ pass failed to converge, skip IQ if true.[/li]
[/ul]

DJGrenola

Edit history:

DJGrenola: 2008-04-01 03:36:37 am

2008-04-01 03:35:29 am

guffaw

is mp4nerf in this ? I've just noticed a (theoretical) bug in it which I'll fix when I can be bothered rebooting into windows.

ballofsnow

2008-04-01 04:20:49 am

It isn't. To be honest it completely slipped my mind, though it would probably be a separate program anyways.

DJG

2008-04-01 06:33:13 am

it's not a huge deal, it's just that I've come to realise that fread() does different things depending on the OS. On win32 I think it behaves like I assumed it did, but it ought still to be fixed.

DJS

2008-04-01 04:48:21 pm

torch slug since 2006

Ah sweet. Multiple AVI loads.

Ritchstorm

2008-04-04 08:54:04 pm

5 + 4 = 9

Anri-chan is a really relaly great program! I used it and it was so easy to understand! The beta seemed alright to me. I never tested everything on it but yeah. Many thanks!

ballofsnow

2008-04-06 03:05:03 am

Quote:

I used it and it was so easy to understand!

This is what I like to hear. Still, if there are areas that can be clearer, let us know.

nate

2008-04-10 06:26:32 pm

just installed this on our new 8-core machine in the lab where i work. have to say i'm impressed with the installer. uninstall is nice too. might want to put the three anri-chan shortcuts also in the start menu group - or just completely not put them on the desktop at all - or just put only the main one on the desktop, or something. thoughts?

also, what are going to call the final program files dir? anrichan3? or anrichan3.0 or something? i ask because it would be nice to be able to write scripts that call things in the anrichan dir without having to run some kind of library function that sets the anrichan path variable in every one of them so that every time the dirname changes all the scripts don't break (whew). same goes for paths to plugins in avisynth scripts. i mean personally for me i don't use the main anrichan interface but i use everything else as a kind of toolkit i can pop open on a given doze install.

also at some point we need to update the anrichan docs in the kb, so do we have any volunteers for that? it shouldn't be too bad, just need to go through step by step and make sure everything is accurate, just a bit of new info for e.g. nmf added, etc. if no one else wants to do it then i will but i can't promise when i'll get to it. could be a month from now or even more.

just installed this on our new 8-core machine in the lab where i work. have to say i'm impressed with the installer. uninstall is nice too. might want to put the three anri-chan shortcuts also in the start menu group - or just completely not put them on the desktop at all - or just put only the main one on the desktop, or something. thoughts?

also, what are going to call the final program files dir? anrichan3? or anrichan3.0 or something? i ask because it would be nice to be able to write scripts that call things in the anrichan dir without having to run some kind of library function that sets the anrichan path variable in every one of them so that every time the dirname changes all the scripts don't break (whew). same goes for paths to plugins in avisynth scripts. i mean personally for me i don't use the main anrichan interface but i use everything else as a kind of toolkit i can pop open on a given doze install.

also at some point we need to update the anrichan docs in the kb, so do we have any volunteers for that? it shouldn't be too bad, just need to go through step by step and make sure everything is accurate, just a bit of new info for e.g. nmf added, etc. if no one else wants to do it then i will but i can't promise when i'll get to it. could be a month from now or even more.

Flip

2008-04-10 06:47:02 pm

1-Up!

I just want to say how impressed I am with the anri-chan software. Honestly, I'm completely computer retarded when it comes to anything more complex than microsoft office, surfing the web, or playing minesweeper. Yet I was able to extract a sample video, make quality samples, and can now upload my own segments without even having to look at the knowledge base.

Excellent job guys, this software really helps to simplify the run submission process.

Id rate it at stupidproof/10.

nate

2008-04-11 05:59:16 am

always good to hear.

also, while i'm being pedantic - proper capitalization is anri only, not chan (referring to the start group).

ballofsnow

Edit history:

ballofsnow: 2008-04-11 05:37:04 pm

2008-04-11 05:34:40 pm

Quote:

just installed this on our new 8-core machine in the lab where i work. have to say i'm impressed with the installer. uninstall is nice too. might want to put the three anri-chan shortcuts also in the start menu group - or just completely not put them on the desktop at all - or just put only the main one on the desktop, or something. thoughts?

I noticed the start menu thing. For desktop shortcuts, I'd say all or none. Best thing would be to have a screen on the installer with checkboxes for desktop shortcuts.

The uninstaller is currently only uninstalling anrichan and lagarith, not AviSynth. Again, best thing would be to have a screen with checkboxes.

Quote:

also, what are going to call the final program files dir? anrichan3? or anrichan3.0 or something?

anrichan

Quote:

also at some point we need to update the anrichan docs in the kb, so do we have any volunteers for that? it shouldn't be too bad, just need to go through step by step and make sure everything is accurate, just a bit of new info for e.g. nmf added, etc. if no one else wants to do it then i will but i can't promise when i'll get to it. could be a month from now or even more.

Quote:

also, while i'm being pedantic - proper capitalization is anri only, not chan (referring to the start group).

Will be fixed.

[quote]just installed this on our new 8-core machine in the lab where i work. have to say i'm impressed with the installer. uninstall is nice too. might want to put the three anri-chan shortcuts also in the start menu group - or just completely not put them on the desktop at all - or just put only the main one on the desktop, or something. thoughts?[/quote]
I noticed the start menu thing. For desktop shortcuts, I'd say all or none. Best thing would be to have a screen on the installer with checkboxes for desktop shortcuts.

The uninstaller is currently only uninstalling anrichan and lagarith, not AviSynth. Again, best thing would be to have a screen with checkboxes.

[quote]also, what are going to call the final program files dir? anrichan3? or anrichan3.0 or something?[/quote]
anrichan

[quote]also at some point we need to update the anrichan docs in the kb, so do we have any volunteers for that? it shouldn't be too bad, just need to go through step by step and make sure everything is accurate, just a bit of new info for e.g. nmf added, etc. if no one else wants to do it then i will but i can't promise when i'll get to it. could be a month from now or even more.[/quote]
 :(

[quote]also, while i'm being pedantic - proper capitalization is anri only, not chan (referring to the start group).[/quote]
Will be fixed.

Kryal

2008-04-18 08:28:04 am

from red to blue

Well, correct me if I'm wrong, 1 pixel bob stops shaking. Well it hasn't when I encoded my new segment 1 sadly. Either that or it was shaking too much for one pixel.

ballofsnow

2008-04-18 01:01:28 pm

Use the sample extractor so we can take a look.

Kryal

2008-04-18 02:57:32 pm

from red to blue

http://www.sendspace.com/file/wf71j6

There you go Tongue

ballofsnow

Edit history:

ballofsnow: 2008-04-19 03:12:25 am

2008-04-19 03:10:11 am

Quote:

Well, correct me if I'm wrong, 1 pixel bob stops shaking. Well it hasn't when I encoded my new segment 1 sadly. Either that or it was shaking too much for one pixel.

Actually, shaking too little for one full pixel.

I have no idea what console this is for, but I do know that these settings are correct: one pixel - n, nes - n. After that, if it's neither GB or GBA, say yes to the deflickered question.

And on that note, you helped find a bug. The setting for deflicker wasn't being saved to job.bat. It'll write the correct avisynth scripts the first time, but if job.bat regenerates those avisynth scripts, it won't do the deflickering.

Thanks!

nate

Edit history:

nate: 2008-04-19 03:22:10 am

2008-04-19 03:21:18 am

this is really a can of worms ... i don't have much time atm but i will say this much, that if whatever that is is on the wii virtual console, then it is neither nes nor wii but a combination of both (nes + deflickering) and that i have no idea how to convey that to the user.

Kryal

Edit history:

Kryal: 2008-04-19 08:38:58 am

2008-04-19 08:30:05 am

from red to blue

Thanks Ballofsnow, I know how to do this damn encoding for my PAL Silver run. Yayz. Grin

EDIT: I got no Deflickered Question, but it says deflickered. I'll assume this is anri-chan remembering stuff.

nate

2008-04-19 04:38:23 pm

one thing we might want to test before releasing beta 2 is to input an interlaced avi from a capture card and see if anri-chan causes chroma ghosting due to converting it to yv12 or similar without interlaced=true (if necessary).